What Are The Best Screen Material For Projector

SaveSavedRemoved 0
Deal Score0
Deal Score0

Which screen material for a projector is best among all? What Screen Material You Should Go For? We will answer all your question here.

There are different types of screen material for projectors Which are discussed below in details.

Front projection screens are available in a large variety of materials. In the past, the screen was offered in three of any type.

These were glass beaded, pearlescent, and silver lenticular screen materials. Each of them has certain limitations and do not work perfectly.

 

Let us discuss them first, then we will see in detail the new type of screen materials.

Glass beaded screen

These screens are the ones with a higher gain. But you will face a large loss of viewing angle and resolution. This is the main problem with a large gain that it reflects all light at a single spot and other areas of the screen are less bright.

So you can only watch a good image if you sit perfectly front on the screen. These screens are retroreflective. It means that their preferred direction of reflection is towards the light source.

If you have a ceiling mounted projector, you will get the brightest image right under the ceiling. All of us know that there is nothing watchable at this much height in the screen.

Other places of the screen may seem dull. These screens are also not stable mechanically. This is because the beads ay move or fall off completely. This will develop dark spots on the screen.

Pearlescent screens

This also offer a high gain. However, at times, it shifts the color to red. It has also a tendency to develop hot spots. These screens have a very narrow viewing angle like other screens with high gain. In past people thought that more gain means more brightness means better visual experience.

However, these screens are not easily available nowadays because of their shortcomings. The tech used in them makes them very expensive too so it is useless to invest in these type of screens.

Silver lenticular screens

If you look at cons, these screen are much same like Pearlescent screens. These have a higher gain, develops a color shift to blue and hot spots in the screens.

These screens are very good for old images that were black and white and the projectors then were low in power. But this material is not suitable for contemporary projectors.

With the advent of active shutter glasses, this material screens have now become obsolete and are of no use.

Nowadays there are two types of screens available everywhere and there is a lot of debate among them. One of them is grey screen material while other is Matte white screen material.

Matte White Screen material

These has been used from decades in projector material and stood the first choice of all manufacturers and users. It has a gain ratio of 1 or near to 1.

This makes it just like a wall painted white but with better quality. It lets you watch a picture in its most natural way and don’t provide any shift of color; your white is pure white and your black is a good black.

In recent times, we had developed very high contrast projectors. The Matte White screen material is perfect for these projectors as they support all the qualities of the projector. You will get a perfect image on this white screen.

The white screen is favored more if you have a very dark environment available. This way, nothing will reflect back to the screen and you will get a perfect image.

If the room you are using has some light available, it will affect the contrast of the screen a little bit. This is because the dark parts of the picture will not become completely dark but it is quite acceptable.

Despite all its cons, if we want to get a perfectly natural like the image, we are left with nothing else than Matte White screen material for our projector screen.

In recent times, there is a lot of marketing hype that you must use grey front projection screen materials. It is said that they improve the contrast of the screen. Let us analyze this in detail that whether grey screens are worth buying or not.

Gray screens

They are also called high contrast screens. The reason for this name is because they tend to boost the contrast on digital projectors. They are perfect for rooms that are not dark enough to absorb all reflection.

Thus, the grey screen absorbs the light in a much better way than a white screen can do. For you to get the same results from a white screen, you must make the room completely this means no lights, black furniture, black carpet, and black paint in the room which is difficult to afford and the room is too not available for any other work.

Grey screens work very effectively because they make the dark images completely dark to look. The white image is not completely white and this is one of the major cons to these screens. You may need to sacrifice a little bit for this cons of the grey screen if you can’t afford to design a completely dark room for your movies.

If we sum up all the debate, the three types of projectors, used in past, are of no use nowadays. They shift the color and provides a narrow viewing angle.

You must decide between Matte White and grey screen. If you are not fond of adventures and want to remain on the safe side of the debate, go for white screen material. They are perfect, they are most liked by manufacturers as well by users. The experience you get, will be much like a natural image.

However, there is not much problem in shifting towards a grey screen if you feel that most of the time you will be using the screen in bright environments. This makes the grey screen, undoubtedly, a good option for office conference rooms and classrooms.

We will be happy to hear your thoughts

      Leave a reply

      This site uses Akismet to reduce spam. Learn how your comment data is processed.

      ReviewsCon
      Register New Account
      Reset Password